This is a full stereo set, containing a DCC and ACC cassette deck, tuner, cd player and amplifier.
belts and rollers
Analog Compact Cassette (ACC) Deck
The belt on the ACC deck is 103 mm flat length, so:
straal | radius : 33 mm omtrek | circumference : 206 mm diameter | diameter : 66 mm platte lengte | flat length : 103 mm
- Width: 4 mm.
- Thick: 0,5 mm.
The square belt is 65 mm flat lenght, so:
straal | radius : 21 mm omtrek | circumference : 130 mm diameter | diameter : 41 mm platte lengte | flat length : 65 mm
- Width: 1 mm.
Digital Compact Cassette (DCC) deck
The mechanism is the same as in the Philips DCC951 and DCC730. ???? <= need to check this, not really sure about that.
- capstanbelt lenght folded flat approx. 110 mm, or maybe a little bit shorter.
straal | radius : 35 mm omtrek | circumference : 220 mm diameter | diameter : 70 mm platte lengte | flat length : 110 mm
- Width 3 mm.
- Thick 0,5 mm.
- pinch roller: 13 x 6 mm, axis: 2 mm.
Tray loading belt
straal | radius : 13 mm omtrek | circumference : 80 mm diameter | diameter : 25 mm platte lengte | flat length : 40 mm
Tip: recording from other sources
And here is a top tip: you can indeed record from ACC -> DCC, and also from tuner -> DCC or tuner -> ACC, but you should not use those small preset buttons for recording.
You proceed as follows:
- Suppose you want to record from ACC -> DCC. Insert the ACC and the empty DCC, rewind the DCC, press REC PAUSE on the DCC, RECORD will appear on the display, the player will start writing LEAD IN etc., please wait for it, then press PLAY on the analog deck and on PLAY of the DCC. A recording is made from the ACC to the DCC.
- Same for recording from Tuner to ACC or DCC: press REC PAUSE, press TUNER, and press PLAY. This works for both the analog deck and the digital deck.
Good luck with it!