X11 forwarding for sudo users

From www.ReeltoReel.nl Wiki
Revision as of 16:20, 11 June 2019 by Pvdm (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Can’t start X11 applications after “su” or “su -” to another user

To get access to the X client applications such as system-config-date, xclock, vncviewer we need to export the DISPLAY settings of a remote host to the local server. This is commonly done using below commands.

# ssh root@remotehost 
remotehost# export DISPLAY=x.x.x.x:y.y

Where x.x.x.x:y.y – is the display settings of the system from which you connected to the remote host.

You can also use the -X option with ssh to directly export the DISPLAY on the remote host.

# ssh -X root@remotehost

But now if you try to switch to another user on the remote system and export the display again, you would get and error – “Error: Can’t open display:”.

# ssh -X root@remotehost 
# su - [username]
# export DISPLAY=x.x.x.x:y.y 
# xclock
Error: Can't open display: x.x.x.x:y.y

X11 forwarding for sudo users

Just setting the DISPLAY is not enough. X authentication is based on cookies, so it’s necessary to set the cookie used by the user that initiated the connection. The following procedure allows a sudo user to use the ssh based X11 tunnel:

1. Connect the remote host using the -X option with ssh.

# ssh -X root@remote-host

2. Now list the coockie set for the current user.

# xauth list $DISPLAY
node01.thegeekdiary.com/unix:10  MIT-MAGIC-COOKIE-1  dacbc5765ec54a1d7115a172147866aa
# echo $DSIPLAY

3. Switch to another user account using sudo. Add the cookie from the command output above to the sudo user.

# sudo su - [user] 
# xauth add node01.thegeekdiary.com/unix:10  MIT-MAGIC-COOKIE-1  dacbc5765ec54a1d7115a172147866aa

4. Export the display from step 2 again for the sudo user. Try the command xclock to verify if the x client applications are working as expected.

# export DISPLAY=localhost:10.0
# xclock