Difference between revisions of "X11 forwarding for sudo users"
(Created page with "=Can’t start X11 applications after “su” or “su -” to another user= To get access to the X client applications such as system-config-date, xclock, vncviewer we need...")
Revision as of 15:20, 11 June 2019
Can’t start X11 applications after “su” or “su -” to another user
To get access to the X client applications such as system-config-date, xclock, vncviewer we need to export the DISPLAY settings of a remote host to the local server. This is commonly done using below commands.
# ssh root@remotehost
remotehost# export DISPLAY=x.x.x.x:y.y Where x.x.x.x:y.y – is the display settings of the system from which you connected to the remote host.
You can also use the -X option with ssh to directly export the DISPLAY on the remote host.
# ssh -X root@remotehost
But now if you try to switch to another user on the remote system and export the display again, you would get and error – “Error: Can’t open display:”.
# ssh -X root@remotehost # su - [username] # export DISPLAY=x.x.x.x:y.y # xclock
Error: Can't open display: x.x.x.x:y.y
X11 forwarding for sudo users
Just setting the DISPLAY is not enough. X authentication is based on cookies, so it’s necessary to set the cookie used by the user that initiated the connection. The following procedure allows a sudo user to use the ssh based X11 tunnel:
1. Connect the remote host using the -X option with ssh.
# ssh -X root@remote-host
2. Now list the coockie set for the current user.
# xauth list $DISPLAY node01.thegeekdiary.com/unix:10 MIT-MAGIC-COOKIE-1 dacbc5765ec54a1d7115a172147866aa # echo $DSIPLAY localhost:10.0
3. Switch to another user account using sudo. Add the cookie from the command output above to the sudo user.
# sudo su - [user] # xauth add node01.thegeekdiary.com/unix:10 MIT-MAGIC-COOKIE-1 dacbc5765ec54a1d7115a172147866aa
4. Export the display from step 2 again for the sudo user. Try the command xclock to verify if the x client applications are working as expected.
# export DISPLAY=localhost:10.0 # xclock