Philips DCC600

From www.ReeltoReel.nl Wiki
Revision as of 14:35, 9 February 2018 by Pvdm (talk | contribs)
Jump to navigation Jump to search

Onderhoud van een Philips DCC600:

  • rechthoekige ladebovenklep eraf schroeven (ligt OP de cassette. TORX 6 nodig) en dan kun je bij de kop: goed schoonmaken met wattenstaafje en IPA. Let op: kop is zeer fragiel.
  • rechthoekige bovenlade heeft 3 witte/gele nylon wieltjes: schoonmaken.
  • de 2 kleine aandrukrolletjes eruit wippen en schoonmaken met IPA en daarna een nacht in verzadigde afwas laten weken.
  • de 2 snaren vervangen: lade en loopwerk.
    • de snaar van de lade is vierkant: 80 mm diameter en 1 mm dik.
    • de snaar van het loopwerk is 3,5x0,5x300mm (breedte x dikte x lengte).
  • de 2 capstans reinigen (IPA).
  • loopvlak (zwart, op de 2 wielen) van de capstan-riemen schoonmaken.
  • loopwerk smeren.
  • eventueel druppeltje olie in de motoren.
  • Het soldeerwerk van de voeding nalopen.

Maintenance of a Philips DCC600:

  • unscrew the rectangular drawer top cover (is located on top of the cassette, TORX 6 required) and then you can access the head: clean well with cotton swab and IPA. Note: head is very fragile.
  • rectangular top drawer has 3 white / yellow nylon wheels: clean.
  • flip out the 2 small pressure rollers and clean with IPA and then soak overnight in saturated detergent.
  • replace the 2 strings: drawer and running gear.
    • the string of the drawer is square: 80 mm diameter and 1 mm thick.
    • the belt of the running gear is 3.5x0.5x300mm (width x thickness x length).
  • clean the 2 capstans (IPA).
  • clean the tread path (black, on the 2 wheels) of the capstan belts.
  • lubricate running gear.
  • maybe drop of oil in the engines.
  • Check the solderings in the power supply board.